METROPWR FX1, is a modern VECTOR POWER/SWR METER completely digital. It’s composed of a wattmeter and a power coupler for measurements up to 3/5kW. It has a very modern design, and very high performance. It has inside a fast 32bit processor plus a coprocessor to handle all the measurements in real time, and measure Power (AVG, PeP, dBm) , SWR, R, Z, X, and more.
It has a large Oled display very fast and responsive, with which you can monitor:
- Measurement errors
- High SWR alarm
- RX/TX/Standbye
- Monitoring ADC/ACT
- USB PC RX/TX
In the picture, the Metrowatt FX1 with the first menu through which you can view
- AVG power, PeP (10kW autoranging scale)
- Express power mW / W / kW and dBm
- SWR
- Double function smeter Power AVG,P&P
- Fast ADC 16bit
- Parameter Measurement Antenna Resistance, Impedance, Reactive (R, Z, X) Up to 3 / 5kW
- Operational OM band
* Exp port to connect FX7 is optional
New software for Windows to control the FX1 via USB
Technical Features VECTOR SWR/POWER METER METROPWR FX1
- Coverage 1.8/55 MHz 160/6mt
- HF/55MHz Measure Power AVG, PeP, dBm, R, Z, |X| , SWR, Frequency
- Wide Autoranging Power range 0.5W/5kW full-scale 10kW
- HF/50MHz Optional Couplers 0.5W /3kW (FX3) – 0.5W/5kW (FX5)
- Accuracy SWR error about 5%*
- Directivity Coupler 30dB
- Accuracy Power about 5%*
- Operating voltage 9/13.8V
- Dimensions 145x145x70 mm
- Weight 200gr
Functional characteristics
- Display Oled 3.1”
- Fast uP 32bit
- Internal Menus (expandable)
- PC USB port
- ADC resolution 16bit
- Fast 1 x OUT Port
- updating Firmware through USB
- 4 x SMA rear port
- expandable 2 x Sensor + 1 X Antenna Switch
- Control software via USB compatible Windows X64,MACOSX
FX1/773/5 Accessories and Sensors
Optional Coupler FX3
- Coverage 1.8/55 MHz 160/6mt
- Power 3kW PeP
- Directivity 30dB
- Flatness 0.1 dB
- Connector so259 + SMA
Optional Coupler FX5
- Coverage 1.8/55 MHz 160/6mt
- Power 5kW PeP
- Directivity 30dB
- Flatness 0.1 dB
- Connector so259 + SMA
Optional Radio/Antenna Switch FX7*
- Coverage 1.8/55 MHz 160/6mt
- Power 1kW PeP
- 1X4 Positions So259
- Flatness 0.1 dB
- In/out EXP Bus (Easy Lan Conector)
- No need ext. supply
- FX7* (for FX771 2019 Version)
- FX7 (for all Version FX1/FX773/FX775
*half band after accuracy calibration
* Exp port to connect FX7 is optional